Truma ZUE Mode D'emploi / Instructions De Montage page 11

Entering the current time
Press the key and hold until
the display flashes. Set current
time with the keys or . If
the keys are pressed for longer
than 5 seconds the fast forward
is initiated.
Entering the
current weekday
Press the key and hold until
the display flushes, after approx.
5 seconds the day indicator
flashes. Set the current weekday
with the keys or .
Programming the
switch-on times
Press key once, on the display
the programme number 1 appears.
Enter the requested switch-on
time with the keys or .
After approx. 5 seconds the
weekday indicator flashes. Enter
the requested switch-on weekday
with key . Press key once
again to transfer the data to the
memory. On the display appears
programme number 2. Enter the
requested switch-on time and
weekday as before and press key
once again. The programme
number 3 is set as before. After
pressing key again no pro-
gramme number shows on the
diplay and the data is in the
memory.
In order to avoid having to
carry out reprogramming
for every weekday in a situation
in which the same heating time
recurs each day, the next possi-
ble weekday is automatically dis-
played on memory spaces 1 and
2. The weekday can be explicitly
set at memory space 3.
Activate switch-on times
Press key until the requested
switch-on time appears. The dis-
play changes automatically back
to current time and the pro-
gramme number shows on the
display.
Delete switch-on times
Press key until no switch-on
programme number appears in
the display.
Operating time
Press key . The operating time
shows on the display. After ap-
prox. 2 seconds the operating
time can be set with the keys
or . The display changes auto-
matically back to current time.
11