Memory Function; Multi-Stage Cooking - Haier MWM0701TW Guide De L'utilisateur

English

15. MEMORY FUNCTION

(1) Press "MEMORY" to use the memory function. The LED will display 1,2,3.
(2) If the memorized procedure has been set, press "START/ +30 SEC." to use it.
If not, continue to set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "MEMORY" to save the procedure and
return to the waiting state. If you press "START/ +30 SEC.", it will save the
operation and then begin operating the setting.
Note
Example: To set the following procedure as "Memory 2," if you want to

16. MULTI-STAGE COOKING

This microwave oven can be set with 2 stages cooking at most. If one stage is
defrost by weight, it will placed as the first stage automatically. Only one of the 2
stages can be defrost.
Example: To defrost 20oz of beef first, and then cook with 80% microwave
power for 7 minutes:
When the defrost procedure is finished, the buzzer will sound once, and the
second stage will begin.
(1) The auto menu can't be set as one of the 2 stages.
Note
(2) Defrost by time can be set as the one of stages.
17
Auto menu cooking cannot be set as memory procedure.
cook the food with 80% microwave power for 3 minutes and
20 seconds, follow these steps:
1) In the waiting state, press "MEMORY" twice, until the
screen displays "2".
2) Press "POWER" three times until "PL8" displays.
3) Press number keys "3, 2, 0" in order to input the
cooking time.
4) Press "MEMORY" to save the setting. The buzzer sounds
once, then returns to the waiting state. If you press
"START/+30SEC." after the above step, the procedure
will be saved as the memory 2 and operated.
5) As long as the electricity is not cut off, the procedure
will be saved all the time. If electricity is interrupted, the
procedure needs to be reset.
6) If you want to run the saved procedure, in the waiting
state, press "MEMORY" twice. The screen displays "2".
Then press "START/+30SEC." to run.
1) Press "DEFROST" once to choose defrost by weight function.
"dEF1" displays.
2) Press "2, 0" in sequence to set the weight.
3) Press "POWER" three times to set 80% microwave power.
4) Press "7, 0, 0" in sequence to set the cooking time.
5) Press "START/ +30 SEC." to start cooking.