Before Using The Appliance; Operation - Unold 78816 Notice D'utilisation

BEFORE USING THE APPLIANCE

1. Remove all packaging materials and check, if all parts are complete, in
particular the tool to remove the knife.
2. Before using the appliance for the first time, wipe it with a damp cloth (see
chapter Cleaning)
3. Place the slicer on a flat, clean, solid, and dry surface.
4. Place the tool into the recess on the right side of the motor block under the
carriage guide.
5. Insert the carriage into the guide.
6. Then push it down on the left side until it clicks in.
7. Place the rest holder on the carriage.
8. Place the dish from the left side under the carriage.
9. Put the plug into a power socket as per rating label.
10. Adjust the desired cutting thickness from 0-15 mm by turning the wheel.
11. Choose the desired speed from 1 to 3.

OPERATION

1. Place the food to be sliced on the carriage and press it slightly against the
rebate plate. The food must not contain any bones or other hard compo-
nents.
2. The appliance offers an instant operation and a permanent operation.
3. Instant operation
Just press the backside of the switch downwards. The motor starts running
and stops immediately as soon as you release the switch.
20
Copyright UNOLD AG | www.unold.de