The Device Switches Off Automatically; Spare Parts; Technical Data - Heiniger STYLE MIDI Instructions De Service

Technical data

The device switches off automatically

Fault Rectification
•
... the device switches If the battery has drained, charge the device
off automatically using the charger or the plug-in power supply
unit.
•
... run duration with Clean and oil the knife head [15] (s.
battery charging is illustrations [B] and [C]).
distinctly shorter than
before
•
... battery does not Send the device to the service address
charge specified on the reverse side of the manual.
According to the current state of the art, parts of electronic devices are subject
to a certain extent to wear through use.
To ensure flawless function and safety, we recommend regular inspection of
the device by service (see reverse page of this manual).
28
Notice

Spare parts

Use only original spare parts which can be ordered from service (see reverse
page of this manual).
If the power cable has damaged or squeezed, it must be replaced completely
together with the plug-in power supply unit.
Technical data
Model
Power supply unit
Input
Output
4 cutting lengths
5 comb attachments
Dimensions (L x W x H)
Weight (device)
Emission sound pressure level LpA
Vibration total value ah
Style Midi (OC20)
Type 152920 or C20
100 - 240 VAC; 50 / 60 Hz
5.9 - 6.5 VDC / 900 mA
0.5 - 2.5 mm
4, 8, 12, 16, 20 mm
175 x 46 x 50 mm
< 240 g
< 70 dB(A)
3.96 m/s2