Introduction; Intended Use; Package Contents; Description Of Components - ULTIMATE SPEED ULG 3.8 B1 Mode D'emploi

CAR BATTERY CHARGER
ULG 3.8 B1

Introduction

Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The Ultimate Speed ULG 3.8 B1 is a multi-stage
car battery charger that is suitable for charging
and trickle-charging 6 V or 12 V lead-acid batteries
(batteries) with electrolyte solution (WET), electro-
lyte absorbent mats (AGM) or gel electrolyte (GEL).
This appliance is not suitable for charging lithium-ion
batteries. This appliance is not intended for com-
mercial use and must be used indoors only.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.

Package contents

Car battery charger ULG 3.8 B1
These operating instructions

Description of components

See Figure A:
LED display "Mode 1"
LED display "Mode 2"
LED display "Mode 3"
LED display "Mode 4"
LED display "Error"
LED display "Fully charged"
LED display "Charging"
LED display "Standby mode"
"MODE" selection button
│ GB │ IE
■ 12
See Figure B:
Charger
Fixing holes
Mains power cable
Positive terminal clamp
Negative terminal clamp

Technical details

Rated voltage:
Rated power
consumption:
Rated DC output
voltage:
Rated DC
output current:
Fuse (internal):
Ambient temperature: 0°C to 40°C
Protection type:
Protection class:
Battery type:
220–240 V ∼ 50/60 Hz
(alternating current)
60 W
6 V / 12 V
(direct current)
0.8 A/3.8 A
T2A
2 A
IP 65
II / (double insulation)
6 V lead-acid battery
1.2 Ah–14 Ah
12 V lead-acid battery
1.2 Ah–120 Ah
ULG 3.8 B1