Publicité
2
USING THE WASHING MACHINE
VARIABLE SPIN
The machine offers a wide selection of spin speeds that can be selected beforehand according
to the wash programme. To change the spin speed, simply press button (2) to select the required
speed. The corresponding speed led will light-up each time the button is pressed. To exclude the
spin, select the led corresponding to symbol
N.B. the maximum spin speed will vary according to the model and is indicated by the
Leds on the machine. The maximum spin speed that can be selected for each programme
is indicated by the leds that light-up automatically when the wash programme is selected.
Spin load imbalance control: This washing machine is equipped with a special electronic
control system for correctly balancing the wash load. Prior to each spin, the system ensures
that the washing is evenly distributed in the drum.
If the washing is not evenly distributed, the final spin speed is reduced, and if the load is
very unbalanced, the spin is not effected.
DELAYED START
The machine is fitted with a delayed start function. This allows the washing machine to be
programmed to start the wash cycle up to 8 hours later. The delay in hours can be selected as
follows: press the button (1) to set a delay of 1, 2, 4, 8, hours. Press START (7). the button (1)
signalling that the function has been activated. The machine will wait for the number of hours
set to elapse and then start the wash cycle automatically.
START BUTTON
Press this button to start the wash cycle. The button (7) to indicate that the wash cycle has
started.
PROGRAMMER KNOB "STOP"
The stop function resets the washing machine. If, for any reason, you want to change the wash
programme or add more washing to the load during the wash cycle, simply place the programmer
knob in position "STOP". Then re-position the knob on the new programme and press the "START"
button.
Warning!! only use this function if strictly necessary and then only if the programme
to reset has been running for a few minutes. Before opening the door after a reset,
wait 2 minutes for the locking mechanism to release.
OPTIONAL FUNCTIONS
If one of the following buttons is selected, it will light up. If a function button has been
pressed by mistake or is no longer required, the option can be cancelled by simply re-
pressing the button.
PREWASH
Press this button to obtain a short prewash of maximum temperature 40°C and approximately
10 minutes duration. This function can only be used with "COTTON, SYNTHETIC and DAILY"
programs.
ENERGETIC WASH
When this button is pressed, the washing machine will run a wash cycle at the set temperature,
though with a longer duration. The button is enabled for the "COTTON" and "SYNTHETICS"
programs.
GB
, if present, or the writing "no-spin".
1000
800
500
STOP
Stop
90
75
60
40
40
R
35
30
°C
30
60
40
30
30
40
40
30
40°
kg.
6
3
4
Publicité
