Cleaning And Caring For The Camera; Warranty - Dometic PerfectView CAM604 Instructions De Montage Et De Service

Cleaning and caring for the camera

8.5 Checking the function and setting the camera
➤ Check the function of the camera after you have connected it to a monitor.
You can switch between the close-up and long-distance range of the camera by
switching between the camera inputs on the display device.
➤ Align the camera using the image on the monitor to help you:
The monitor image of the close-up should show the rear or the bumper of the
vehicle at the bottom edge of the screen. The middle of the bumper should be
in the middle of the screen (fig. k, page 8).
➤ Tighten the two fastening screws of the camera.
Settings for contrast and brightness can be made on the monitor.
9 Cleaning and caring for the camera
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
22
PerfectView CAM604
EN