Specifications - Sony Trinitron CPD-E430 Mode D'emploi

To display this monitor's name, serial number, and
date of manufacture.
While the monitor is receiving a
video signal, press and hold the
MENU button for more than
5 seconds to display this
monitor's information box.
If thin lines appear on the screen
(damper wires)
These lines do not indicate a malfunction; they are a normal
effect of the Trinitron picture tube with this monitor. These are
shadows from the damper wires used to stabilize the aperture grille.
The aperture grille is the essential element that makes a Trinitron
picture tube unique by allowing more light to reach the screen,
resulting in a brighter, more detailed picture.
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer, the screen will go blank
and the ! (power) indicator will either light up green or flash
orange. If the ! (power) indicator is lit in orange, the computer is
in power saving mode. Try pressing any key on the keyboard or
moving the mouse.
x If the ! (power) indicator is green
1
Disconnect the video signal cable, or turn off the
connected computer.
2
Turn the monitor OFF and then ON.
3
Hold the control button upward for a few seconds
before the monitor enters power saving mode.
If all 4 color bars appear (white, red, green, blue), the monitor is
working properly. Reconnect the video input cables and check the
condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
Inform your authorized Sony dealer of the monitor's condition.
x If the ! (power) indicator is flashing orange
Turn the monitor OFF and then ON.
If the ! (power) indicator lights up green, the monitor is working
properly.
If the ! (power) indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the ! (power) indicator and inform your authorized Sony
dealer of the monitor's condition. Be sure to note the model name
and serial number of your monitor. Also note the make and model
of your computer and graphics board.
INFORMATION
MODEL : CPD-E430
SER NO : 1234567 W
MANUFACTURED : 2001-30 R
G
B
Damper
wires

Specifications

CRT
0.24 mm aperture grille pitch, 90-degree deflection, FD Trinitron
19 inches measured diagonally
Viewable image size
Approx. 365 × 274 mm (w/h) (14
18.0" viewing image
Resolution (H:Horizontal, V:Vertical)
Maximum: H: 1920 dots, V: 1440 lines
Recommended: H: 1280 dots, V: 1024 lines
Input signal levels
Video signal: Analog RGB: 0.700 Vp-p (positive), 75 Ω
SYNC signal: H/V separate or composite sync:
TTL 2 k Ω , Polarity free
Sync on Green: 0.3 Vp-p (negative)
Standard image area
Approx. 352 × 264 mm
× 10
7 1
(13 / /
8 2
Deflection frequency (H:Horizontal, V:Vertical)
H: 30 to 96 kHz, V: 48 to 170 Hz
AC input voltage/current
100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
Power Consumption
Approx. 135 W
Operating temperature
10 ºC to 40 ºC
Approx. 451 × 471 × 461 mm (w/h/d)
Dimensions
× 18
7 5
(17 / /
8 8
Mass Approx. 25.5 kg (56 lb 3 oz)
Plug and Play DDC2B/DDC2Bi
GTF
Supplied accessories
Power cord
This instruction manual
× 10
3 7
/ / inches)
8 8
inches)
× 18
1
/ inches)
4
(continued)
GB
7