Setting The Dishwasher; Switching The Dishwasher On And Off; Ending Or Changing A Program - Inventum VVW7020 Mode D'emploi

5

setting the dishwasher

SWITCHING THE DISHWASHER ON AND OFF

• Select the desired program with the program selector knob (1) . The light in the Start/Pause button turns on.
• If you prefer, you can choose an additional function, like half load and/or delay timer.
• Press the Start/Pause button to activate the dishwasher. The light in the Start/Pause button turns off and the indicator light
of Washing (3) switches on.
You can follow the progress of the program using the indicator lights on the control panel. As long as the dishwasher is washing,
rinsing or drying, the indicator light (3) will be on. The dishwasher remains silent for about 40-50 minutes whilst drying. When the
indicator light Ready (3) lights up, the program is finished.
• Switch the dishwasher off by turning the program selector knob (1) to the setting ●.
NOTE! You can slightly open the door and wait a few minutes before unloading the dishwasher. The dishes and
cutlery will still be very hot and may break as a result of the heat. Moreover, the dishes dry better when allowed
to stand for a few minutes.

ENDING OR CHANGING A PROGRAM

If you would like to end a program of change a program while a washing cycle is already running.
• Carefully open the door when a washing cycle is running.
• Press the Start/Pause button (2) during 3 seconds while a washing cycle is active. The light Dry will light up indicating the
program is paused. The dishwasher will discharge the water in it for nearly 30 seconds.
• As soon as the program has ended, the indicator light Ready (3) will light up.
• Switch the dishwasher off or select another program.
●
3
1
2
35
English •