Liquid waste:
Remove the battery pack.
Unlock the locking latches and remove the motor head
assembly.
Remove the filter cover.
Remove and clean the wet use filter. Allow the filter to
completely dry before reattaching.
NOTE: Replace the filter if it is worn or damaged.
Empty the canister; wash out if necessary. Before replac-
ing the motor head assembly, make sure all pieces are
completely dry.
Replace motor head assembly and lock securely.
CAUTION:
Do not allow liquid pick up to remain in the canister for
extended periods of time. Moisture can develop in the
motor compartment and shorten the life of the motor.
CAUTION:
Do not turn unit upside down, as liquid may enter the
motor unit.
Look for these accessories where you purchased this product or call 1-800-525-2579:
Dry Use Filter ...............................................................................................................................................019071004011
Wet Use Filter ..............................................................................................................................................019071004010
NOTE: ILLUSTRATIONS START ON PAGE 9 AFTER
MAINTENANCE
ACCESSORIES
FRENCH AND SPANISH LANGUAGE SECTIONS.
STORAGE
See Figures 16 - 17, page 11.
Clean all foreign material from the wet/dry vac.
Clean the outside of the canister with warm water and
mild soap.
Empty and clean the canister, flexible hose, wands, and
attachments with warm water and mild soap and allow
to completely dry before storage.
Store flexible hose and attachments inside the canister
or in the storage areas located on the motor head and
canister.
NOTE: To attach the storage wand with clip to the canis-
ter, place the wand onto the clip holder and slide it down
to secure it in place.
The canister should be disinfected as needed and before
prolonged storage.
Store indoors in a place that is inaccessible to children.
Keep away from corrosive agents such as garden chemi-
cals and de-icing salts.
8 — English