Absaar AB-MJS150 Mode D'emploi page 9

Masquer les pouces Voir aussi pour AB-MJS150:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Operating instructions
5) DESCRIPTION OF THE PRODUCT
Description :
➊ Torch (LED lighting)
➋ Connector for the start-up assistance cable
➌ Micro USB 5 V - 1.5 A connector for recharging
➍ USB 5 V - 2.0 A output power for accessories.
➎ LED indicator of the charge level of the internal battery
➏ "Power" power supply button
6) DESCRIPTION AND INDICATIONS OF THE LEDS
Indicator of the
Description
charge status of the
and indication
internal battery.
of the "Power"
power supply
button
Description of the
charge status levels
when recharging
the internal battery
of the Mini Jump-
starter.
Description
of the charge
statuses when
recharging
the internal
battery of the
Mini Jumpstarter
Others
Torch LED
lighting (1)
Press the power supply button (6), the LED indicator (5) indicates the charge status
of the internal battery. When charging, the LEDs light up and flash one after the
other until fully charged. This is indicated when all the LEDs are lit.
The LEDs (5) indicate the charge status of the internal battery in relation to the
voltage of the internal battery
0%-25%
25%-50%
50%-75%
75%-99%
100 % (end of charging process)
Press the power supply button (6), the LED indicator (5) indicates the charge status
of the internal battery and automatically switches itself off after 30 seconds if no
charge is detected.
100%-75%
75%-50%
50%-25%
25%-1%
1%- 0%
0%
1- Double-click the „power" power supply button (6) to light the torch (1).
2- Click again to activate the S.O.S. mode
3- Click again to activate the stroboscopic mode
4- Click again (or double click) to switch off the torch (1).
The torch (1) cannot be switched on when charging the battery or when the LEDs (5)
indicate that the internal battery's power is weak.
9
F
G
LED No.1 flashes
LED No.1 und No.2 flash
LED No.1, No.2 und No.3 flash
LED No. 1, No.2, No.3 und No.4 flash
All the LEDs are lit continuously.
All the LEDs are lit.
LED No. 1, No. 2 and No. 3 are lit
LED No. 1 and No. 2 are lit
LED No. 1 is lit
LED No. 1 flashes
All the LEDs are off
ABSAAR
B
C
D
E

Publicité

Table des Matières
loading

Table des Matières