klover SOFT 80 Instructions D'utilisation page 52

CS.SB80.IST-1 / Rev 1.3 ENGLISH
12 13 14
2
1
Remove the cast iron top, by loosening the two screws shown in the picture (Fig. 12).
Loosen the two screws shown in the picture (Fig. 13) and dismantle the two RH and LH side panels (Fig. 14).
17
15 16
Remove the cover of the cast iron top (Fig. 15), by loosening the five screws shown in the picture (Fig. 16).
Use a pipe cleaner or a vacuum cleaner to remove any dust residues from the cast iron heat exchanger (Fig. 17).
19
18
Remove the cast iron heat exchanger (Fig. 19), by loosening the 4 nuts shown in the picture (Fig. 18).
24