CS.SB80.IST-1 / Rev 1.3
ENGLISH
6
7
8
After opening the lower inspection door, remove the two knobs on the ash box
(Fig. 6)
and empty the latter
(Fig.
7).
Vacuum any residues inside the ash box compartment
(Fig.
8).
Reassemble all the previously removed components, making sure that the seals guarantee perfect tightness.
Non-routine cleaning
The extraordinary cleaning of the appliance must be done at least every 30 days so as to always guarantee efficient performance and optimal operation.
Please proceed as follows:
Perform routine cleaning;
9
10
11
Remove the cover of the inspection port by loosening the two screws
(Fig. 9)
and vacuum any residues inside the inspected compartment
(Fig.
10).
To ensure correct operation, it is necessary to remove the sawdust deposited on the base of the tank
(Fig. 11)
at least once every 30 days. The
pellet tank must be emptied at the end of every season.
Annual cleaning
Annual cleaning of the appliance must be carried out at least once a year so as to always guarantee its efficient performance and optimal operation.
Proceed as illustrated below:
Perform routine and extraordinary cleaning;
23