GB
4 Operating
4.1
Use of
light-therapy
using the
Medinose
4.2
Duration and
Frequency of
Application
16
•
8
Insert the plug
Medinose appliance
•
The nasal applicator
to be inserted in the nostrils. Insert the LEDs as far as possible into the
nostrils. The nasal applicator should nevertheless sit comfortably.
•
Press the ON/OFF-button
light on the ON/OFF-button
same time the light emission of the nasal applicator
•
Light emission will be ended automatically after approx. 4 1/2 minutes
and two acoustic signals (beeps) will be emitted. The treatment can also
be stopped by pressing the ON/OFF-button
This will also lead to the emitting of two acoustic beeps. The green indi-
cating light will go out after the treatment has stopped.
•
Now remove the nasal applicator
NOTES
•
If the green indicating light on the ON/OFF button
this indicates that the connector
or there is insufficient charge in the battery for an application or
the LED of the nasal applicator
•
If the green indicating light on the ON/OFF button
lights up nor flashes, this indicates that the battery has been
incorrectly inserted or is completely discharged.
•
An application with the Medinose appliance only lasts approx. 4 1/2
minutes. During this time, the LEDs radiate red light having a wavelength
of approx. 660 nm and a defined intensity.
•
The automatic shut-off ensures that the duration of treatment always re-
mains the same and prevents the nasal mucosa from being overloaded.
•
The Medinose should be used three times a day at the beginning of
treatment. The frequency of application may be reduced when symptoms
have been alleviated.
•
Treatment should be spread over the course of a day. The first applica-
tion should be carried out either before or after breakfast and the last in
the evening before going to bed whilst the third application can be carried
out during the day simply by taking the appliance with you and using it
when the opportunity arises. The practical belt clip
unit makes it easy to wear.
NOTE
The applications should be continued for at least one week and
preferably two to achieve the desired treatment result.
of the nasal applicator into the socket of your
1
.
7
must be spread slightly apart to allow the LEDs
3
to start the treatment. The green indicating
3
will be lit constantly during use. At the
7
from the nostrils.
8
7
is not working.
7
will begin.
3
at any time manually.
3
flashes,
is not plugged in correctly
3
neither
4
on the back of the
G
G
G
G
G
G
G
G