Choosing A Mounting Position - Honeywell F100 Guide D'installation

Masquer les pouces Voir aussi pour F100:

Table des Matières

Les langues disponibles

Choosing a Mounting Position

The Media Air Cleaner mounts in any position within the return air duct, usually next to the furnace blower

compartment, but the arrow on the cartridge must point in the same direction as the airflow. See Figs. 1-8 for

proper location of the media air cleaner for a variety of furnace installations.

NOTE: The media air cleaner cabinet is sturdy enough to easily support the weight of the furnace and evaporator

coil.

M939B

M940B

Fig. 1. Highboy furnace with side installation. Media air

Fig 2. Highboy furnace, with installation beneath

filter is mounted vertically where return enters side inlet

furnace. Media air cleaner is mounted horizontally

of furnace.

where return enters from below.

Before beginning Mounting:

I have chosen an installation location that meets the requirements on pages 3 through 5.

F100 Media Air Cleaner 68-0239EF—06

Table des Matières

Table des Matières