Spare Parts And Consumables - Silk-n ReVit Essential Instructions D'utilisation

L
After cleaning, we recommend you store the device in its original
box.
A
With the exception of the tips, never immerse your Silk'n ReVit Essential
in water.
8.1 Replacing the filter
The filter needs cleaning or replacing due to the build-up of discarded skin. We
recommend that you do this every few treatments.
To replace the filter:
1. Remove the tip from the device . You will then see
the rubber cap and the small black filter.
2. Remove the rubber cap (#2), and then remove the
filter (#3).
3. To clean the filter, brush off any debris, then place it
back on the device. To change a filter, remove the
current filter and insert a new one.
4. Place the rubber cap back into position, then put the
tip back on the device, making sure that it is firmly
connected.
8.2 Replacing the tip
We recommend that you replace the tip every six months, or earlier if the
abrasive end of the tip is damaged.

9. Spare parts and consumables

You can order more filters and tips from our website: www.silkn.eu. For
replacement rubber caps or AC/DC adapters, please contact Silk'n Customer
Service.
27
3
2
EN