Burg Wächter TRSE 6000 Manuel D'utilisation page 10

2.4 Detailed description of selected basic functions
1. Opening the safe using the factory code
– Press the On / Enter key
– The Code / Fingerp indication is displayed (in case you possess electronics
without fingerscan, Code is displayed instead.)
– At this point you are asked to enter the Admin.
Code (factory setting 123456)
– The instruction Please turn knob is displayed
Attention: The message Please turn knob implies the action with the knob
of the locking unit, for which the opening code has been entered.
2. Changing the Administrator Code
– Press the On / Enter key
– The indication of Code / Fingerp is displayed
– Press the Function key
– The Change code menu is displayed
– Press the On / Enter key
– The indication of Administrator is displayed
– Press the On / Enter key
– The indication of the Old code is displayed
– At this point you are asked to enter the Admin.
Code (factory setting 123456)
– Press the On / Enter key
– The indication of the New code is displayed
– Enter the new code
– Press the On / Enter key
– The indication of Repeat code is displayed
– Enter the new code
– Press the On / Enter key
– The indication of Code successfully changed is displayed
TSE BUSINESS 5000
3. Creating a user with a code
– Press the On / Enter key
– The indication of Code / Fingerp is displayed
– Press the Function key
– The Change code menu is displayed
– By pressing the key 2 reach the Administrator menu
– Press the On / Enter key
– Admin setup Create user is displayed
– Press the On / Enter key
– Create code is displayed
– Press the On / Enter key
– At this point you are asked to enter the Admin.
Code (factory setting 123456)
– The indication of User 00x is displayed
– Please enter the user code and confirm it with ENTER
– Press the On / Enter key
– FS combination to be confirmed with ENTER is displayed
– Press the On / Enter key and accordingly the Function key
– After confirmation, Save with the On key is displayed.
4. Creating a user with an E-Key
– Press the On / Enter key
– The indication of Code / Fingerp is displayed
– Press the Function key
– The Change code menu is displayed
– By pressing the key 2 reach the Administrator menu
– Press the On / Enter key
– Admin setup Create user is displayed
– Press the On / Enter key
– Create E-Key is displayed
– Press the On / Enter key
– At this point you are asked to enter the admin.
Code (factory setting 123456)
– FS combination to be confirmed with ENTER is displayed
– Press the On / Enter key and accordingly the Function key
– User 00x Store E-Key using ENTER is displayed
1 – Please bring the E-Key in the programming mode.
– Press the On / Enter key
– E-Key in Prog mode, continue with Enter is displayed
– Press the On / Enter key
– After confirmation, Save with the On key is displayed
1 If the message FS combination to be confirmed with ENTER is
displayed you have to decide whether the user should get the full
opening right or half of it.
Full opening right: press Function key
Half opening right: press ENTER key
If you create a half opening right the Pin code is only to be allowed
to open with another opening secret e. g. the fingerprint.
1
English | 10