ECG LD 1333 K Mode D'emploi page 42

2 – Mounting the TV adapter panel to the TV
Check to see how the mounting holes are arranged on the back side of your television set. Select the proper
bolts for your TV. Remove the TV adapter panel from the wall board. If you are using the VESA 100×100
mounting layout, mount the adapter panel directly to the TV with four bolts (A1, A2). If you are using the
VESA 100×200 or 200×200 mounting layout, select the bolts to mount the adapter panel and position the
TV adapter attachment as indicated in "Detail 1". Mount the attachments to the adapter panel with four bolts
(A1–A4). Tighten the bolts fi rmly, but not too much.
GB
42
For mounting M4,
M5 bolts to the TV
Adapter
panel
A2
(Bolt M5 × 12 mm)
Mounting holes
(panel)
For mounting
M6, M8 bolts to
the TV
Detail 1
C1
A2
(Bolt M5 × 12 mm)
Mounting holes
(panel)
C1