Attaching And Replacing The Treatment Tips; Operation; Recommended Precautions - Silk-n H4201 Mode D'emploi

Treatment area
Neck

7.2 Attaching and replacing the treatment tips

The product has two treatment tips (Fine and Coarse, indicated
on the treatment tip)
fine treatment tip.
Use the fine treatment tip for general treatment or
delicate finishing, and the coarse treatment tip for heavy
duty exfoliation.
To attach and replace the treatment tips:
1. Make sure the main unit
adapter .
7
2. Remove the current treatment tip from the main unit by
pulling it off gently.
3. Attach the other treatment tip on the main unit. Make sure
the treatment tip is firmly in place before use.

8 Operation

8.1 Recommended precautions

• Before you treat an area for the first time, do a spot test on
a small area of skin. Continue the treatment if you have no
adverse reaction.
• We recommend that you start with the low suction mode
and move to the high mode after 2–3 treatments. If you
experience any discomfort, work the treatment area in low
suction mode.
• To start with, work each area 2–4 times. When your skin is
used to the treatment, you may increase to 4–6 times.
• It is recommended not to use the product more than twice a
week.
• Stop immediately if you feel any discomfort.
Recommendation
Use smooth, downward strokes for
the whole neck area.
. We recommend that you start with the
1
is not connected to the AC/DC
4
EN
14