Télécharger Imprimer la page

LEXIBOOK BT500 Série Mode D'emploi page 7

Enceinte bluetooth

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
UNPACKING THE DEVICE
When unpacking, ensure that the following elements are included:
1 x Bluetooth® speaker
1 x USB charging cable
1 x 3.5mm audio cable
1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags
are not part of this product and should be discarded.
LOCATION OF CONTROLS
Front
Top
1.
Hand free / Play / Pause/ Volume –/ Volume +
2.
Charging indicator
3.
Bluetooth® indicator
4.
Speaker phone indicator
Back
CHARGING THE DEVICE
1. Make sure to power off the speaker before charging it.
2. Connect the micro USB side of the cable to the speaker's USB Charge jack port.
3. Connect the other side of the cable to a USB power source.
While using the device, if you encounter one of the situations below:
-the volume is low
-the sound is not stable
-the display is blinking
-the speaker shuts down
It means that the battery is out of power and needs to be charged.
Notes:
- The Charging reminder indicator (2) lights up red when the speaker is charging.
- The Charging reminder indicator turns off when charging is complete.
7

Publicité

loading