Operation; Setting Up Drill Chuck - HOLZMANN MASCHINEN BSG 13E Mode D'emploi

11

OPERATION

11.1

Setting up drill chuck

 Take chuck off device
 Fixing handle turning counterclockwise to relax drill
 Insert drill chuck (4) and fixing handle (9) slightly. Fig. E.
Fig. E
 Alignment button (1) down, hold and use chuck Fig. F
 Chuck setup guide with rotary hook-limiting (10) use completely. Fig. H
 Push the drill in the chuck to stop and turn Fig. G, thus clamping springs can push in the
drill flute. Fig. H
Fig. G
 Alignment button (1) slowly release with a slight rotation of the drill while adjustable
jaws clamp into groove. The drill is perfectly set up as in Fig. H
 Drill press and hold the stop with fixing handle clockwise turn. Fig H
 Take out the chuck by pressing the alignment button
HOLZMANN MASCHINEN GmbH
Adjustable jaws
www.holzmann-maschinen.at
size.
Fig. F
Fig. H
OPERATION
26
BSG 13E