Forno Venetzia BELLAGIO 300 Guide D'assemblage page 8

14. To extend the retractable tool holder
slide the tool holder upward until the plastic
head screws can be steered into the "hooks"
on the left side of the slot in the tool holder.
15. Ensure all 4 plastic head screws are
completely inserted into the "hooks" and
the tighten. This helps minimizes the
possibility of the tool holder retracting when
holding oven tools in the extended position.
16. To retract the tool holder, remove all tools, and loosen all 4 plastic head screws. Now lift the
tool holder slightly to take it off the "hooks" and gently allow it to slide down in to the storage
position.
6