Safety Instructions - Toolland TM 76035 Mode D'emploi

TM 76035
HEAT GUN
TM 76035
WARNING
Read this manual carefully before using the
machine, for your own safety.
Always wear safety glasses.
Always wear a safety masque
against dust.
Always wear protection gloves.
In accordance with the European
standards and directives.
Class II – The machine is double
insulated, an earthed wire is not
necessary.
Warning! Risk of personal injury
or damage of the tool or other
objects.

SAFETY INSTRUCTIONS

When using the machine, always observe the
enclosed safety instructions as well as the
additional safety instructions.
Keep work area clean. Cluttered areas

and benches invite injuries.
Keep children away.

Do not let children play with the machine.

Dress properly. Do not wear loose

clothing or jewelry. They can be caught in
moving parts. Wear protective hair
covering to contain long hair.
Use safety glasses, a dust mask and

protection gloves. Also use ear protection
if the noise level exceeds 85 dB(A).
Do not overreach. Keep proper footing

and balance at all times.
Check for damaged parts. Never use a

damaged machine. Damaged parts must
be properly repaired or replaced by an
authorized service center.
Avoid unintentional starting. Always

disconnect tools when they are not in
www.toolland.eu
use. Also before servicing, changing
accessories, ...
Always use a suitable cable according to

the specifications of this machine.
Always keep the area of the power supply

socket free when operating the machine.
You must always be able to disconnect
the machine immediately when
necessary.
Never unplug the machine by pulling the

cable.
Never unplug the supply cord when the

machine is operating.
Do not force the machine. It will do a

better job and operate more safely at the
rate for which it was intended.
Maintain tools with care. Keep tools clean

for better and safer performance.
Consider work area environment. Do not

use electric tools in damp or wet
locations. Keep work area well lit. Do not
use electric tools near flammable liquids
or gases.
ADDITIONAL SAFETY RULES FOR HOT-
AIR GUNS
Beware: this hot-air gun works at

temperatures between 300-600°C
without any visible sign of this
temperature.
Beware of the hot-air flow: it can cause

burns.
Avoid touching the mouthpiece while the

machine is in operation: because of the
heat the mouthpiece can cause burns.
Fire can start if the machine is not used

with care.
Do not use the machine too long in one

place.
Be careful in areas with flammable

materials in the vicinity. Remember that
heat can be carried over to flammable
materials which are not in sight.
Never use the machine in explosive

areas.
Never use the machine under damp

conditions.
Do not use the machine as a hairdryer.

Never aim the hot-air flow at yourself or

others to dry clothing or footwear.
Never aim the hot air stream at electrical

wiring or power outlets because of risk of
electric shock.
English
9