Transport, Storage, Installation Location; Transport And Storage Conditions; Unpacking; Scope Of Supply - IKA AOD 1 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 70

3 Transport, Storage, Installation Location

3.1
During transport and storage, the system must be protected against mechanical
shock, vibration, dust deposits, and corrosive atmospheres. In addition, the relative
humidity should not exceed 80 %. Transport should only be undertaken with the unit
in its original packing.
3.2
Please unpack system components carefully and check for any signs of damage. It
is important that any transport damage is noted during unpacking. If necessary, the
damage must be assessed immediately by the transport company (post, railway or
transport contractor).
3.3
The standard scope of supply of the Decomposition System AOD 1 consists of:

Transport and Storage Conditions

Unpacking

Scope of Supply

1
2
1 x Remote Ignition Unit AOD 1.2 (see Pos. 1 in illustration) with ventilation grip
1 x Decomposition Vessel AOD 1.1 (see Pos. 2 in illustration)
with fixed platinum ignition wire C 5012.3 and a carrying grip
1 x Oxygen Filling Station C 48 (see Pos. 4 in illustration)
1 x IKA
control standard for chlorine and sulphur AOD 1.11 (not illustrated)
Operating Instructions for Decomposition System AOD 1, Oxygen Filling Sta-
tion C 48 and Decomposition Vessel AOD 1.1 (not illustrated)
3
4
IKA
-WERKE AOD 1
Page 3-1
5
Ver. 01 01.03

Publicité

Table des Matières
loading

Table des Matières