Bergstrom SLIM FIT Instructions De Montage page 16

SLIM FIT
EN
6
Screw (2) M6 L=18 hexagons on the rear of the
unit (direction of travel) with rubber washers,
and tighten with a torque of 4.75±10% Nm.
7
Screw (2) M6 L=67 hexagons on the front of the
unit (direction of travel) with rubber washers,
and tighten with a torque of 4.75±10% Nm.
8
Position the console supplement and align
the unit. The grooves in the base must first be
checked to ensure they are not visible and are
supported on the EPDM seal.
8
6
7
8
16