Using The Micro Heki - Dometic MICRO HEKI Instructions De Montage

Micro Heki
8

Using the Micro Heki

Opening and closing the Micro Heki (fig. a)
8.1
➤ Press the release button (1), and open the roof hood with the bracket at the same
time (2).
Opening the roof light completely
➤ Slide the bracket (2) into the I position.
Opening the roof light to the ventilation position
➤ Slide the bracket (2) into the II position.
You can push down the sliders (3) on the left and right to lock it.
Closing the roof light
➤ Slide the bracket (2) into the IV position.
➤ Guide the bracket (2) with slight pressure to the left and right via the (4) catches
so that the roof hood is locked and the bracket (2) is on the release button (1).
Opening and closing the roller blinds (fig. b)
8.2
A
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window.
In strong sunlight, only close the blackout roller blind, if installed, two
thirds of the way.
I
NOTE
You can adjust the blackout roller blind, if installed, and the flyscreen
separately.
➤ Hold the recessed handle of each roller blind and pull it into the required
position.
EN
Using the Micro Heki
9