Connecting The Towel Radiator; Choosing The Position Of The Remote Control; Connecting The Blower - Acova 40005959 Notice D'utilisation

EN

2.2 Connecting the towel radiator

To get the most out of your appliance and enjoy the highest standards of comfort,
we recommend that you install the appliance near places of high heat loss (windows,
doors, etc.) wherever possible.
You will find a complete set of assembly instructions in your appliance's box.
Connection to the central heating system should be done by a professional and
according to best professional practice.
In addition to the applicable regulations, we recommend you also check the
following:
- the water used in the heating circuit must not be aggressive or corrosive;
- the system must contain no traces of dissolved gases. In this event, thorough
degasification must be performed and the system must be bled at its high points.

2.3 Choosing the position of the remote control

The remote control must under all circumstances be situated in the same room
as your towel radiator, with a maximum distance of 8m. You should preferably position
the remote control in direct line of sight, uninterrupted by any obstacle (wall, furniture,
etc.) to ensure that the infra-red signal is received correctly.
It can be secured to the wall or placed on the base provided (see chapter 3.1.1).
Before securing it in place, and after making the electrical connection of your
towel radiator, run an operating test. Make sure there are no objects likely to disrupt
signals between the remote control and the infra-red receiver on the towel radiator.

2.4 Connecting the blower

The technical specifications of your radiator are shown on its nameplate.
Please note these down before installing it and before requesting any after-sales
assistance.
28
IP: protection level of your appliance against the
ingress of solid foreign bodies and water spray
Voltage and power required for installation
Appliance reference number
Class II: double insulated
OF: serial number
Manufacturer code
CLASS II CONNECTION (FRENCH MARKET):
When connecting the appliance to the mains, you must observe:
• the voltage indicated on the nameplate;
• conventional colour coding:
– blue or grey: neutral
– brown: live
N (blue or grey)
L (brown)
CLASS I CONNECTION:
For other
France), the appliance must be installed in
accordance with standards in force and with
rules of good professional practice in the coun-
try of use.
The flexible cable supplied with the
appliance is designed to be connected to the
mains via a plug.
40005959 40005959
countries (apart from
EN
Neutral
Live
29