Toto Lloyd TL930DDLQ Manuel D'installation Et D'utilisation page 6

1. Remove old pop-up drain assembly.
2. Place a ring of putty around drain opening of
the sink.
3. Insert threaded end of drain body up
through drain hole and attach flange to
body.
4. Place one end of spring clip on end of
ball rod. Pass the tip of the rod through
the hole in the lift rod straps and then
through the hole on the other end of the
spring clip.
5. Insert bottom of the lift rod into hole at
top of lift rod strap. Tighten with thumb
screw.
INSTALLATION PROCEDURE
Pop-up Drain Installation
6