PRESIDENT JOHNSON II USA Manuel D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Press first PTT switch (12) and then t key (5) to decrease
TALKBACK level from actual level to 1 (min.). The level is
displayed for 3 seconds if the PTT switch (12) is not released.
•LOCAL
(•F/MEM + short press)
Press •F/MEM (6) and t key (5) to activate/deactivate.
"LOCAL" is displayed when the function is on.
This feature allows a better listening through close contact.
When your partner is close, active this function to avoid
distortion.
6) •F/MEM ~ DW ~ •COLOR
•F/MEM
(short press)
Short press this key to enter in mode FUNCTION.
when the function is on.
10 seconds without pressing any key.
For memories, see § MEMORY page 12.
DW
(long press)
Press and hold the DW key (6) for 1 second to activate/
deactivate the DUAL WATCH function. When function in
on, "DW" is displayed. This function lets you watch over
channel 9 or 19 and the channel you are using. The first
long press activates the DW function between channel 9
and the busy channel. A new press activates the function
between channel 19 and the busy channel. The number
of the selected channel, the memorized channel includ-
ed, and channel 9 or 19 are alternately displayed. "EMG"
is also displayed at the same time as channel 9 or 19. The
selected channel can be modified during the dual watch.
A new long press on DW key (6) disables the DW function.
•COLOR
(•F/MEM + long press)
Press one time the •F/MEM key (6) and press and hold the
blinks
automatically disappears after
•COLOR key (6) for 1 second to alternate between 3 colors:
Green -> Blue -> Orange
7) 9/19 ~ HI-CUT ~ •M3
9/19
(short press)
Channels 9 and 19 are automatically selected by pressing
this key. A push activates channel 9, "EMG" is displayed. A
second push activates channel 19 "EMG" is displayed. A
new push returns to the previous channel, "EMG"disappears.
HI-CUT
(long press)
HI-CUT eliminates high frequency interferences. Has to be
used in accordance with the reception conditions. "HI-CUT"
appears on the display when the HI-CUT filter is activated.
•M3
See § MEMORY page 12.
8) ANL/NB ~ SCAN ~ •M2
ANL/NB
(short press)
ANL/Automatic Noise Limiter filter reduces back ground
noises and some reception interferences.
NB/Noise Blanker filter suppress an ignition noise in the
reception.
Short press ANL/NB key (8) key to alternate the 4 positions
switch: • ANL and NB off • ANL on / NB off • ANL off / NB
on • ANL and NB on.
When a filter is active, it name "ANL" or/and "NB", is dis-
played on the LCD.
SCAN
(long press)
CB
MODE
Press and hold SCAN key (8) for 1 second to activate SCAN
function (for CB channels) in an increasing way. "SCAN"
9

Publicité

Table des Matières
loading

Table des Matières