Table des Matières
Publicité
PREFACE
This Assembly Manual contains the informa-
tion needed to assemble the Yamaha water-
craft correctly prior to delivery to the customer.
Since some external parts of the watercraft
have not been assemblied at the Yamaha fac-
tory for convenience of packing, assembly by
the Yamaha dealer is required. It should be
noted that the reassembled watercraft should
be
thoroughly
cleaned,
adjusted prior to delivery to the customer.
NOTICE
Because Yamaha constantly strives for prod-
uct improvement, the service specifications
may be subject to change in the future. If any
change is introduced into the specifications or
assembly procedures, Yamaha dealers will be
notified by a technical bulletin.
IMPORTANT MANUAL INFORMATION:
Particularly important information is distin-
guished in this manual by the following nota-
tions.
The safety Alert Symbol means ATTEN-
TION!
BECOME
SAFETY IS INVOLVED!
WARNING
Failure to follow WARNING instructions
could result in severe injury or death to the
machine
operator,
bystander, or a person inspecting or repair-
ing the watercraft.
CAUTION:
A CAUTION indicates special precautions
that must be taken to avoid damage to the
watercraft.
NOTE:
A NOTE provides key information to make pro-
cedures easier or cleaner.
inspected,
and
ALERT!
YOUR
passenger(s),
a
SYMBOLS USED IN THIS
ASSEMBLY MANUAL
In order to simplify descriptions in assembly
manuals, the following symbols are used:
: Coat with water resistant grease.
(Yamaha grease A, Yamaha marine
grease)
: Tightening torque.
: Provide clearance.
: Install so that the arrow mark faces
upward.
: Frontword of the watercraft.
: Made of rubber or plastics.
: Tighten temporarily.
: Apply locking agent.
LOCTITE 242 (blue)
Size:
d/D : Diameter of part.
l
: Length of part.
E
Publicité
Table des Matières
