Fault Fi Nding; Resolving Problems; Optional Accessories - Ardo SM2239 Mode D'emploi

All electric appliances may breakdown at some point.
Remember to call a qualifi ed electrician in these cases. However, many problems can be resolved
without the need for external intervention.
Important: If a fault occurs, disconnect the appliance from the mains supply immediately.
Before calling the customer service centre, check the points listed below.
TROUBLESHOOTING IS ONE WORD
If the drier doesn't start
• Check that:
1) The appliance is plugged into the mains
supply.
2) The mains socket is working correctly:
2a) The fuse has not blown. (Check by plugging
in another appliance such as a table
lamp).
2b) All the instructions in the manual have been
followed.
If, after all these checks have been carried out, the appliance still does not work, inform the
nearest customer service centre.
When contacting the service centre, inform them of the appliance model, serial number and
type of fault.
This information will help the service centre operator in procuring the necessary spare parts,
thus guaranteeing a speedy and effi cient repair service.
To save space, the retailer can supply an accessory to enable the drier to be mounted on top of a front-
loading washing machine.
The installer can provide the information on the model of appliance on which this accessory can be
fi tted.
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
......................................................................................................................................................................
......................................................................................................................................................................
.................................................................................................................................................................
SM2239
MAINTENANCE
FAULT FINDING
If the drier doesn't start
• Check that:
The washing does not dry
• Check that:

OPTIONAL ACCESSORIES

NOTES
1) The door is closed properly.
2) The "START" button has been pressed.
1) The air exhaust tube is not twisted or
kinked.
2) The fi lter is not blocked. (Remember that
when the door is opened, the internal parts
of the drier and the washing may be very
hot).
21
GB