Safety Information; Intended Use; Definition Of Signal Words And Warning Symbols; Product Specific Safety Notes - Mettler Toledo SLP85 D Série Guide De L'utilisateur

2 Safety Information

2.1 Intended Use

Use the product only for weighing in accordance with this User manual.
•
The load cell is intended for indoor use only.
•
Any other type of use and operation beyond the limits of technical specifications is considered as not
•
intended.

2.2 Definition of Signal Words and Warning Symbols

Safety notes are marked with signal words and warning symbols. These show safety issues and warnings.
Ignoring the safety notes may lead to personal injury, damage to the load cell, malfunctions and false
results.
Signal Words
CAUTION
Attention
Note
Warning Symbols

2.3 Product Specific Safety Notes

Your load cell meets the state of the art technology and complies with all recognized safety rules, however,
certain hazards could arise. Do not open the load cell: It does not contain any parts which can be
maintained, repaired or replaced by the user. If you ever have problems with your load cell, contact your
authorized METTLER TOLEDO dealer or service representative.
Observe instructions
Always operate and use your load cell only in accordance with the instructions contained in the product
documentation. The instructions for setting up your load cell must be strictly observed.
If the load cell is not used according to the product manuals, protection of the load cell may be
impaired and METTLER TOLEDO assumes no liability.
Staff safety
Use only METTLER TOLEDO accessories and peripheral devices, these items are designed to work optimally
with your load cell.
Explosion hazard
It is not permitted to use the load cell in explosive atmospheres of gases, steam, fog, dust and flammable
dust (hazardous environments).
4 Safety Information
Hazardous situation with low risk, resulting in damage to the device or the property
or in loss of data, or minor or medium injuries if not avoided.
Important information about the product (no symbol)
Useful information about the product (no symbol)
General hazard
Electrical shock
SLP85xD