Repair Service; Spare Parts / Accessories; Technical Data - Grizzly EHS 600-61 R Traduction De La Notice D'utilisation Originale

Repair service

• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our ser-
vice center will be glad to provide you
with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
Note: In case of complaint or service,
•
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.

Spare Parts / Accessories

Spare parts and accessories
can be obtained at
www.grizzly-service.eu.
If you do not have internet access, please
contact the Service Centre via telephone
(see "Service-Center)

Technical Data

Hedge Trimmer ................ EHS 600-61 R
Input voltage rating ..... 230-240 V~, 50 Hz
Input powe ...................................... 600 W
Safety class ........................................
Degree of protection .......................... IP20
Idling rotation speed .................. 1400 rpm
Weight ............................................3.1 kg
Length of blades .......................... 610 mm
Cutting length .............................. 550 mm
Cutting capacity ............................. 20 mm
Acoustic power level (L
guaranteed .............................100 dB (A)
measured ..... 97,2 dB(A); K
Sound pressure level
(L ) ................89,8 dB (A); K
pA
Vibration at the
handle (a
h
bow handle (a
Noise and vibration values have been deter-
mined according to the standards and regula-
tions named in the declaration of conformity.
Technical and optical alterations may be
made without notice for the purposes of
improvement. No guarantee can be given
for the accuracy of dimensions, notices and
specifications stated in this manual. The
manufacturer shall therefore not accept li-
ability for statutory claims arising from the
manual.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
Warning:
The vibration emission value may dif-
fer during actual use of the power tool
from the stated value depending on
the manner in which the power tool is
used.
Safety precautions aimed at protect-
II ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and times
when the tool is turned on but is run-
ning idle).
)
WA
2
) ......... 2,95 m/s ; K=1,5 m/s
) .. 1,99 m/s 2 ; K=1,5 m/s
h
GB
=2,77 dB
WA
=2,77 dB
pA
2
2
93