Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
Commissioning
Extent of delivery
• Circular saw BMS 250 including
− Power cable and plug
− TCT saw blade Ø 254 / 30 mm x 2,4; 24 teeth
− Folding frame
• Splitting wedge
• Safety guard with exhaust outlet
• Longitudinal stop
• Table length extension
• 2 supports for bench length extension
• 2 bench width extensions
• 2 transport wheels
• Pushstick
• Extraction hose
• screw bag
• 2 spanners for replacing saw blade
• Operating manual
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Characteristic data of noise
5
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
17
Use of the machine as a bench to circular saw with standard
17
circular saw blade.
17
18
18
No-load
18
Load
20
21
The factor of measurement uncertainty is 4 dB.
21
The values given are emission values and must therefore not
22
simultaneously represent safe workplace values too. Although there is
23
a relationship between emission and immersion levels, it can be
24
reliably deduced whether additional precautionary measures are
25
necessary or not. Factors, which can influence the immersion level
25
currently existing at the workplace include the duration of the effects,
25
the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible
25
workplace values can also vary from country to country. This
26
information should however enable an improved assessment of the
27
danger and risk to be carried out.
Symbols machine
Carefully read
operator's
manual
before
handling the
machine.
Risk of
injuries of
fingers and
hands by the
saw blade
Wear eye and
ear protection
Symbols Operating instructions
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling of the
saw. Not observing this instruction can lead to faults
in the machine.
User information. This information helps you to use
all the functions of the chain saw optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
17
Noise power level
Sound pressure level at
L
= 102 dB(A)
L
WA
L
= 112,4 dB(A)
L
WA
pA
Shut off engine and
remove power cord
before performing
cleaning,
maintenance or
repair work.
Do not expose to
rain. Protect
against humidity.
Wear dust mask.
the workplace
= 98 dB(A)
pA
= 102,5 dB(A)
Publicité
Chapitres
Table des Matières
