Introduction; Intended Use; Features; Package Contents - Parkside PSBSA 20-Li A1 Traduction Des Instructions D'origine

2 SPEED CORDLESS IMPACT DRILL
PSBSA 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for screwing in and
removing screws as well as drilling in wood, metal,
ceramic and plastic and impact drilling in bricks
and masonry. It is not suitable for impact drilling
in natural stone such as granite. The light on this
appliance is intended to illuminate the immediate
work area of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.

Features

Speed selector
Rotation direction switch/lock
ON/OFF switch / Speed control
Bit holder (magnetic)
Battery charge level button
Battery display LED
Battery pack
Release button for the battery pack
LED work light
Additional handle
Chuck
Torque preselection ring
High-speed charger
Red charge control LED
Green charge control LED
│ GB │ IE │ NI
■ 2

Package contents

1 2 speed cordless impact drill PSBSA 20-Li A1
1 high-speed battery charger PLG 20 A1
1 battery pack
1 additional handle
1 set of operating instructions

Technical data

2 speed cordless impact drill: PSBSA 20-Li A1
Rated voltage:
Gearbox:
Rated idle speed:
Hammer frequency:
Max. torque:
Torque levels:
Chuck capacity:
:
Max. drill diameter:
Use only the following battery to operate
the cordless tool: PAP 20 A1
Type:
Rated voltage:
Capacity:
Cells:
Use only the following high-speed battery
charger to charge the cordless tool:
PLG 20 A1
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
20 V (DC)
2 speed gearbox
1st gear: n 0–440 rpm
0
2nd gear: n 0–1650 rpm
0
0–26400 bpm
40 Nm
1–20 + 1 drill level /
+ 1 hammer level
Ø max. 13 mm
30 mm for wood
15 mm for tiles
13 mm for steel
LITHIUM ION
20 V (DC)
2 Ah
5
230–240 V ~ , 50 Hz
(AC)
65 W
T3.15A
3.15 A
21.5 V (DC)
2.4 A
approx. 60 min
II / (double insulation)
PSBSA 20-Li A1