Technical Specifications - Renfert Mobiloskop S Mode D'emploi

7. Guarantee
Provided the unit is properly used, Renfert warrants all
components of the Mobiloskop 'S' for a period of 3
years. The original sales receipt from the specialist
dealer must be presented with any warranty claims.
Components subject to natural wear are excluded
from this warranty.
The warranty is voided in case of improper use; failure
to observe the operating, cleaning, maintenance, and
connection instructions; in case of independent
repairs or repairs by unauthorized personnel; if spare
parts from other manufacturers are employed, or; in
case of unusual influences or influences not in
compliance with the utilization instructions. Warranty
service shall not extend the original warranty.

8. Technical Specifications

Light path: 45°, angled
Visual field diameter:
44 mm [1.734 inches] (5x),
22 mm [0.867 inches] (10x)
Focal depth:
22 mm [0.867 inches] (5x),
10 mm [0.394 inches] (10x)
Working distance:
approx. 150 mm [5.91 inches]
Weight: approx. 3 kg
9. Standard Delivery
1 Mobiloskop 'S'
1 Swivel arm, standard / extended
(incl. electrical lead in the arm)
1 Lens retainer
1 Lens with eyepieces
1 Protecting glass
1 Cover
1 Operating instructions
10. Delivery Versions
No. 2200-0802 Mobiloskop 'S'
with standard swivel arm
No. 2200-0602 Mobiloskop 'S'
with extended swivel arm
11. Accessories
No. 2200-0901 Bench top adapter
No. 2200-0902 Wall mounting adapter
No. 2200-0110 Eyepiece pair, 10x
No. 2200-0120 Eyepiece pair, 20x
No. 2200-0200 Additional 2x lens, magnifies from
5x/10x to 10x/20x
No. 3-0743 Replacement protecting glass to
protect the lenses
Swivel arms:
[1,852 inch]
[1,891 inch]
No. 2200-0601
Extended swivel arm
Lamp adapter (Figure 14):
No. 2200-0501 Lamp adapter incl. mains power
pack, 230 V
No. 2200-1501 Lamp adapter incl. mains power
pack, 110-140 V
No. 2200-2501 Lamp adapter incl. mains power
pack, 240 V
For easy installation on the Mobiloskop 'S'. The
lamps can be individually swivelled and switched on
and off. Illuminating the object being viewed from both
sides produces a high contrast, reflection free surface.
Technical specifications:
Mains voltage: 230 / 110-140 / 240 V
Current consumption: 0.8 A
Operating voltage: 12 V AC
Cold light source (Figure 15):
No. 2200-3000 Microscope illumination, 230 V
No. 2200-4000 Microscope illumination, 120 V
This cold light source assists in three-dimensional
viewing under the microscope. The illumination, which
can be adjusted to three intensity levels, is brought to
the view field via two fibre optic cables. Illuminating the
work area from two sides provides a high contrast view
field, free of intrusive shadows. Both fibre optic cables
are equipped with a focussing lens. The source can be
easily attached to the Mobiloskop 'S' without tools.
Technical specifications:
Mains voltage: 230 / 120 V
Power consumption: 24 VA
Nominal lamp voltage: 8 V
Nominal lamp power: 20 W
Frequency: 50-60 Hz
12. Error List
Problem Possible cause
•
No visible
Magnification
image.
change knob
incorrectly adjusted.
•
Image is not
Incorrect dioptre
sharply
compensation
focussed.
setting
•
Incorrect distance to
the object
•
Dirty lens /
protecting glass
•
Swivel arm
Brake in the swivel
does not hold arm joint is loose.
in place.
[1,182 inch]
[1,891 inch]
No. 2200-0801
Standard swivel arm
Corrective action
•
Turn the knob to its
end stop.
•
Repeat the dioptre
compensation
procedure.
•
Change the distance
to the object.
•
Use a clean, lint free
cloth to clean the lens
/ protecting glass.
•
Tighten the brake
using the star knob.
Subject to modification.