Environment
Install the appliance in a place where the ambient temperature corresponds to the climate
class indicated on the nameplate:
Climate class
Positioning
• The appliance must be installed at a safe distance from heat sources such as radiators,
boilers, direct sunlight, etc. Make sure that air can circulate freely at the rear of the appliance.
For optimum operation, if the appliance is placed under a wall unit, the distance between the
top of the appliance and the wall unit should be at least 100 mm. However, if possible, it is
preferable not to place the appliance under wall units. Precise leveling is possible thanks to
one or more adjustable legs located at the bottom of the appliance.
• WARNING : It must be possible to unplug the appliance from the mains outlet; the mains
outlet must therefore remain easily accessible after installation.
Electrical connections
Before connecting the appliance, make sure that the voltage and frequency indicated on
the nameplate match the power supply to your home. The appliance must be grounded.
The plug of the power cord has a contact for this purpose. If the plug on your power supply
is not grounded, get a qualified electrician to connect the appliance to a separate grounding
line that complies with applicable regulations.
The manufacturer declines all responsibility in the event of failure to comply with the above
safety precautions.
The appliance conforms to EC directives.
Use
Before using the appliance for the first time
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories
with warm water and neutral soap to eliminate the characteristic odor of new appliances.
Dry them thoroughly.
NOTE : Do not use detergents or abrasive powders, as these will damage the finish of the
appliance.
54
V.1.0
Use of the appliance
SN
N
ST
T
Ambient temperature
from +10 °C to +32°C
from +16 °C to +32°C
from +16 °C to +38°C
from +16 °C to +43°C