Initial Commissioning - Geberit AquaClean Sela 146140111 Instructions De Montage

Initial commissioning

Putting the Geberit AquaClean
Sela into operation
Prerequisites
Function tests with the control panel and with the
remote control have been completed successfully.
1
Remove the spray shield.
2
Clean the Geberit AquaClean Sela.
3
Close the WC seat and WC lid.
Result
The Geberit AquaClean Sela is ready for operation.
B1070-003 © 02-2014
966.102.00.0 (02)
1
2
Handing the Geberit AquaClean
Sela over to the customer
Prerequisites
The Geberit AquaClean Sela is ready for operation.
1
Instruct the customer with regard to
operation and cleaning.
For detailed information on the operation
and cleaning, see operating instructions.
2
Hand over end-user documentation to the
customer.
3
Fill in the warranty card together with the
customer, attach the serial number sticker
and send it to Geberit.
4
Attach a second serial number sticker, e.g.
to the last page of the operating
instructions, so it is available for later use.
EN
23