VOLTCRAFT B6 Quadro Notice D'emploi page 69

Save the setting by pressing the "START/ENTER" button.
Now the capacity display starts to blink (bottom line on the right).
With the buttons "INC" or "DEC", you can select the capacity (10 to 50000mAh).
For a quick adjustment, hold the corresponding button down.
Save the setting by pressing the "START/ENTER" button.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous setting or return
to the main menu with the button "BATT. TYPE/STOP".)
With the option "Key Beep", you activate/deactivate the confirmation beep for each push of a button.
The "Buzzer" option switches the signal tone for functions/warning messages on or off.
Briefly press the button "START/ENTER". "ON" (or "OFF") starts to blink in the top display line.
With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Briefly press the button "START/ENTER" in order to save. "ON" (or "OFF") then starts to blink in the bot-
tom display line.
With the buttons "INC" or "DEC", you can select between "ON" and "OFF".
Save the setting by pressing the "START/ENTER" button.
• With the "INC" button, you access the next setting (or with the button "DEC" the previous setting or return
to the main menu with the button "BATT. TYPE/STOP".)
This function monitors the voltage at the charger input (e.g. for a 12V battery). If the voltage drops below
the configured value, the charging process is stopped. This protects the voltage source against com-
pletely discharging (lower voltage cut-off).
Briefly press the button "START/ENTER". The voltage value then begins to flash.
With the buttons "INC" or "DEC", you can set the voltage value (10 to 11V).
Save the setting with the button "START/ENTER"; the voltage then stops blinking.
• With the "INC" button, you return to the first setting (or with the button "DEC" the previous setting or
return to the main menu with the button "BATT. TYPE/STOP".)
68