Lenze L-force Drives 9400 Instructions De Montage page 65

X10
1 6
5 9
SUBD09010
Displays
Pos. Colour
MS Green
DE Red
EDK94ASH24 DE/EN/FR/ES/IT 5.0
Pin Designation Explanation
1 B
TTL output signal from the encoder or encoder simulation
2 A
Maximum output current: 20 mA per channel
3 A
4 +5 V V ±6 %
CC
5 GND −
6 Z
TTL output signal from the encoder or encoder simulation
Maximum output current: 20 mA per channel
7 Z
8 Enable Digital output signal
9 B TTL output signal from the encoder or encoder simulation
Maximum output current: 20 mA per channel
Condition Description
ON The module is supplied with voltage.
The module is not accepted by the standard device (see notes
ON
given in the documentation for the standard device).
l
Wiring the device modules
Function modules
8
65