Intended Use - VOLTCRAFT B6 Ultimate Notice D'emploi

2. INTENDED USE

The "Multicharger/Discharger B6 Ultimate" is used to charge NiCd + NiMH type batteries
(1-18 cells), LiPo/LiIon/LiFe batteries (1-6 cells) and lead acid batteries (1-10 cells,
2V-20V). The charge current can be set between 0.1A and 10A depending on the
connected batteries and their cell number/capacity (see tables in chapter 24).
Batteries can also be discharged; the discharge current is between 0.1 to 5.0A (see tables
in chapter 24).
The charger may only be connected to a stabilised direct current between 11V= and 18V=.
A two-line illuminated LC display and four keys are used to control the charger.
A balancer is integrated into the charger for LiPo/LiIon/LiFe batteries, with balancer
connector sockets for the battery located on top of the charger.
The product is intended for use in dry indoor spaces, it must not get damp or wet!
Any use other than that described above will damage this product and involves the risk of
short circuits, fire, electric shock, etc.
No part of the product may be modified or converted.
Observe all safety instructions and information within this operating
manual.
56