Connections - Hitachi AXM649BT Notice D'utilisation

Connections

Caution: Make all connections before plugging the unit into the AC Power outlet.
Please read these additional installation notes before use.
If the following steps are not followed correctly the unit may become damaged.
Please note the correct steps for setting up the unit are as follows:
1. The speaker wires, control cable between CD player and amplifier are to be connected first.
2. After the above cables are correctly connected, the AC power cord can then be connected to
power outlet.
Caution:
i) Reversing the steps by connecting the AC power cord first will cause malfunction of the
unit.
ii) During operation, if the control cable requires to be reconnected, the AC power supply
must be disconnected first. Otherwise, damage to the unit may be caused.
Speaker
AC Power Cord
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 12
Speaker
Main Unit
N N
N NN
M
AC Power Cord
AC Power Cord
Speaker
Main Unit
GB-12
Speaker
N N
N N
AC Power Cord
2013-3-20 9:44:04