STIL 4852 Mode D'emploi page 3

DOUBLE LINE ROTARY KITCHEN TIMER
Model: 4852
USER MANUAL
Thank you for your purchase of this delicate kitchen timer. The utmost
care has gone into the design and manufacture. Please read the
manual carefully and keep it for further reference.
MAIN FEATURES
1
2
1. LCD display
2. [ CLEAR ] key
- Press to clear current display value.
3. [ M1 ] key
- Press to select memory 1.
4. [ M2 ] key
- Press to select memory 2.
5. [ M3 ] key
- Press to select memory 3.
6. T1 [ START/STOP ] key with LED indicator
- Press to start / stop the timer 1
7. T2 [ START/STOP / ] key with LED indicator
- Press to start / stop the timer 2.
- In idle mode, press and hold with 2 seconds to switch to clock display.
8. [ TIMER SELECT ] key with rotary knob
- Press to select T1 or T2 timer.
Press and hold with 2 seconds to switch between "Hour-Minute" and
-
"Minute-Second" timer mode.
- Rotate to adjust the setting value.
9. Magnet
- allow to stick the timer on the steel surface.
10.Wall mount hole
11. table stand
12.Battery door
- Accommodates 2 AAA batteries.
13.Sound level slide switch
- Able to set the sound level.
13
6
7
8
9
10
11
12
.
TO USE THE COUNTDOWN TIMER
1. Press [ TIMER SELECT ] key to select timer 1 or timer 2.
Timer 1 selected
2. Rotate the rotary knob to set the selected timer. Turn the rotatory
knob clockwise (increase) or anticlockwise (decrease) until
reaching the desired setting.
3. Press T1 [ START/STOP ] key to start / stop the timer 1 count
down. Press T2 [ START/STOP /
count down. During counting time mode, the green light indicator will
keep flashing.
4. Once the count down complete, the alarm will sounds and timer
start count up automatically with red light indicator flashes for 1
minute. When the alarm sound, press current timer's [ START/STOP ]
key to stop the current alarm and return to the pre-set count down time.
HOUR-MINUTE / MINUTE-SECOND TIMER MODE
User may change the timer from
mode and vice-versa, by press and hold [
seconds.
Hour-Minute mode
COUNTDOWN TIMER MEMORY (M1, M2, M3)
To save the timer memory:
1. Press [ TIMER SELECT ] key to select timer 1 or timer 2.
2. Set a desired count down time by using rotary knob.
3. Press and hold the [ M1 ],
"beep" sound) to save the current timer.
Timer 2 selected
] key to start / stop the timer 2
Green
light
Red
light
"Hour-Minute" to "Minute-Second"
TIMER SELECT ]
Minute-Second mode
Press and
hold for 2
seconds
[ M2 ] or [ M3 ] for 2 seconds (with
key for 2