Commissioning
GB
Fig. 6: Display with active test mode
26
Gesendete
Datenpakete
C0003174
5. Terminate the connection test by pressing the key on the FE receiver once and
pressing the ESC key on the RGTF/RGTKF room controller three times
Note: The connection test has been successful if at least 50% of the transmitted
data can be received by the room controller.
For further information on changing parameters and the status of connected wire-
less accessories, see the boiler installation instructions.
For information on the RGTF/RGTKF room controller, see Installation instructions,
RGT/RGTK B and RGTF/RGTKF B room controllers.
Wireless receiver FE
Empfangene
Datenpakete
136 230 06.11