Quick Functions Selectable From The Main Menu - CALEFFI 210 Série Manuel D'installation Et De Mise En Service

Quick functions selectable from the main menu (after first installation)
Viewing the status of the individual zone
KITCHEN KITCHEN CHEN
MODE MODE MODE MODE MODE
20.0°C 20.0°C 20.0°C
Quickly changing the operating mode of the individual zone
KIT KITCHEN CHEN CHEN
MODE MODE MODE MODE MODE
20.0°C 20.0°C 20.0°C
Temporarily activating comfort mode of the individual zone (forcing the setpoint)
KITCHEN
MODE
20.0°C
INFO
MENU
INFO
NTIL 14:00
Select the first option at the top left of the display (in the example KITCHEN)
using the scroll buttons. Repeatedly press the confirmation button to view the
data of the other zones. The temperature measured and the heating status of
the selected zone are displayed.
COMFORT MODE ON UNTIL 14:00 C OMF
Select the MODE command using the scroll buttons and press the
confirmation button. One of the following modes can now be selected:
- AUTO: the controller sets the same operating mode for the individual zone
according to the timetable set in the ZONE PROGRAM menu
- ECO: the controller sets the same operating mode according to the timetable
set in the ZONE PROGRAM menu, but reducing the temperature by 3°C with
respect to the set temperatures.
COMFORT MODE ON UNTIL 14:00 C OMF
- OFF: the controller turns the heating off, closing all the valves of the
individual zone if connected. The anti-freeze protection (8°C) remains
active.
To activate the same operating mode for all the zones, follow the
instructions given in the section ZONE MODE MENU.
Select the set temperature command (setpoint) using the scroll buttons and
press the confirmation button. Change the value using the scroll buttons until
the desired value is reached. Press the confirmation button. Enter the comfort
time duration in hours using the scroll buttons from a minimum of 30 minutes
to a maximum of 24 hours. Press the confirmation button to activate and go
back to the main menu.
COMFORT MODE ON UNTIL 14:00
Select INFO using the scroll buttons and press the confirmation button. An
overview of the operating status of the various zones is displayed. In particular:
TEMP = temperature measured in the zone
SETP= set regulation temperature (setpoint)
VALV= open/close
NOTE: visualized data are updated every 10 minutes
5