Dismounting And Disposal - WIKA PG43SA-S Mode D'emploi

7. Maintenance ... / 8. Dismounting and disposal
Repairs should only be carried out by the manufacturer or, follow-
„
ing prior consultation with the manufacturer, by correspondingly
qualified skilled personnel.
EN
7.2 Cleaning
Suitable for 'in place' SIP and CIP cleaning processes, if appropriate
media are used and the permissible specifications are complied with.
When cleaning from outside ("wash down"), observe the permissible
temperature and ingress protection.
For sterilisation in an autoclave, observe the instructions in chapter
5.8 "Autoclaving".
Vent hole with model PG43SA-S
In order to avoid any change in pressure within the case, the model
PG43SA-S features a vent hole at the case bottom on the rear side.
In case of condensation formation within the case or ingress of low
water quantities from outside, this can be drained through the vent
hole.

8. Dismounting and disposal

14
WARNING!
Physical injuries and damage to property and the
environment through residual media
Residual media in the instrument can result in a risk to
persons, the environment and equipment.
▶
Wash or clean the dismounted instrument, in order to
protect persons and the environment from exposure
to residual media.
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C