Adjusting The Fan Speed; Fan Only; Night Setback Mode; Quiet Mode - Sanyo KHS3082 Mode D'emploi

01_KHS3682_EN.fm Page 10 Friday, February 12, 2010 12:42 PM

3. Adjusting the Fan Speed

A. Automatic fan speed
Simply set the FAN SPEED selector button to the
position.
This automatically sets the best fan speed for the room
temperature.
B. Manual fan speed
If you want to adjust fan speed manually during operation,
just set the FAN SPEED selector button as desired. [
, or ]

4. Fan Only

STEP 3
If you want to circulate air without any temperature
control, follow these steps:
STEP 1 Press the MODE selector button to switch to
the fan mode
STEP 2 Press the ON/OFF operation button.
STEP 3 Press the FAN SPEED selector button to
select the fan speed of your choice (
or

5. Night Setback Mode

Night Setback Mode is used for saving energy.
Press the NIGHT SETBACK button while operation. (except AUTO
and FAN mode)
The mark appears in the display.
To release the night setback function, press the NIGHT SETBACK
button again.
NOTE
Pressing the MODE selector button cancels Night Setback mode.
10
,
STEP 2
STEP 1
.
,
).
A. In Cooling and DRY Mode: (
When the night setback mode is selected, the air conditioner
automatically raises the temperature setting 2 °F when 30 minutes
have passed after the selection was made, and then another 2 °F
after another 30 minutes have passed, regardless of the indoor
temperature when night setback was selected. This enables you
to save energy without sacrificing comfort. This function is
convenient when gentle cooling is needed.
Setting
temperature
2 °F
30 min.
Press the NIGHT
SETBACK button
B. In Heating Mode: ( )
When the night setback mode is selected, the air conditioner
automatically lowers the temperature setting 4 °F when 30
minutes have passed after the selection was made, and then
another 4 °F after another 30 minutes have passed, regardless of
the indoor temperature when night setback was selected. This
enables you to save energy without sacrificing comfort. This
function is convenient when gentle heating is needed.
Setting
4 °F
temperature
30 min.
Press the NIGHT
SETBACK button

6. QUIET Mode

QUIET Mode is used to reduce the fan sound of the indoor unit.
Press the QUIET button.
The mark appears in the display.
To cancel, press QUIET button again.
• In QUIET Mode, the fan rotates at a slower speed than the fan
speed setting.
• If the unit is already operating with a very low airflow, the fan sound
may not change even if the QUIET button is pressed.
and )
2 °F
30 min.
Time
4 °F
30 min.
Time
OI-149-10-EG