Operating Conditions; Electrical Connection; Ingress Protection - WIKA S-11 Mode D'emploi

3. Specifications
Adjustability of zero point and span
Adjustment is made using potentiometers inside the instrument.
Zero point ± 5 %
GB
Span ± 5 %
1) Adjustment not possible for cable outlet with ingress protection IP 68

3.5 Operating conditions

Ingress protection (per IEC 60529)
The ingress protection depends on the type of electrical connection.

Electrical connection

Angular connector DIN 175301-803 A
Circular connector M12 x 1 (4-pin)
Cable outlet
Standard
■
Option
■
1) Adjustability of zero point and span not possible
The stated ingress protection only applies when plugged in using mating connectors that have the
appropriate ingress protection.
Vibration resistance
Process connections without cooling element
■
20 g (IEC 60068-2-6, under resonance)
Process connections with cooling element
■
10 g (IEC 60068-2-6, under resonance)
12
1)

Ingress protection

IP 65
IP 67
IP 67
1)
IP 68
WIKA operating instructions pressure transmitter, model S-11