Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not put perfume, vinegar, starch, descaling agents, ironing
aids or other chemicals in the water tank.
3
Close the water filling door ( 'click').
Temperature and steam setting
Table 1:
Warning: Do not use steam or steam boost at low
temperature, as indicated in the below table. Otherwise,
hot water may leak from the iron.
Fabric type
Temperature
setting
Linen
MAX
●●●
Cotton
●●
Wool
●●
Silk
●
Synthetic
fabric (e.g.
acrylic, nylon,
polyamide,
polyester)
1
Refer to Table 1 to set the temperature dial to the
appropriate setting for your garment.
2
Refer to Table 1 to set the appropriate steam setting for
your garment.
Note: Make sure that the steam setting you select is suitable
for the set ironing temperature.
3
Put the iron on its heel and plug it in. The temperature
light goes on to indicate that the iron is heating up.
4
When the temperature light goes out, the iron has reached
the correct temperature and you could start ironing.
ENGLISH
Steam
Steam
setting
boost
Yes
/ ECO
Yes
No
ECO
No
No
7
Publicité
Table des Matières
