Landmann 0543 Instructions De Montage page 9

Assembly
CAUTION!
For your safety the screw heads should always
point outwards, otherwise there is a risk of
injury.
Only tighten all of the screw connections firmly
when you have finished assembly otherwise it
can result in undesired material stress.
1. Use the M6x30 screws and Ø6.5 washers
to fasten the bowl stand (M) and the stand
reinforcer (N) to the charcoal bowl (K).
2. Put the upper, middle, and lower parts of the
stand (D, H, J) together by inserting them one
into the other.
3. Guide the reinforcing brace (O) through the
bores in the middle parts of the stand (H). Use
the Ø6 washers and M6 cap nuts to secure the
reinforcement brace (O).
4. Screw t he U c onnecting p iece o nto t he u nderside
of the stand head (A) with an M6x10 screw and
M6 wing nut.
5. Fasten the chain deflector pulley (C) in the U
connection piece (B) with an M5x30 screw and
M5 nut.
Information for safe operation of the
barbecue
The barbecue must be positioned on a stable and
secure surface when it is in use.
Do not use in enclosed areas or on covered
areas.
Only use safe lighting materials (such as
LANDMANN solid firelighters).
6. Insert the upper ends of the stand into the
connection of the stand head (A).
7. Guide t he l ong c hain ( E) o ver t he c hain d eflection
pulley (C) and fasten it in the appropriate length
on the chain hook (F) and then hook in the grill
(I).
8. Hook the grill (i) into the hooks of the shorter
chains (G).
9. After assembly firmly tighten all screw
connections.
WARNING!
The barbecue must be positioned on a stable
and secure surface when it is in use, otherwise
it may tip over.
The fuel container has a capacity of approximately 2
kg.
The barbecue should be heated up for approximately
30 minutes before it is used for the first time.
LANDMANN 9